(216) 346-0875 info@ornamentalartsco.com

Cast plaque options

Mounting methods

Standard mounting methods

Stud Mount

Stud Mount

Recommended for concealed mounting on brick or masonry walls.

Through The Face Mount

Through The Face Mount

Cast plaques can be provided with holes through the face for mechanical fasteners. Metal or wood screws provided.

Rosettes & Toggle Bolts

Rosettes & Toggle Bolts

Work well with hollow tile, cement block or drywall surface. Rosettes which cover the machine screws are optional.

Rosettes, Machine Screws & Expansion Sleeves

Rosettes, Machine Screws & Expansion Sleeves

Work well with brick, stone or masonry walls. Rosettes optional.

Rosettes w/ Wood Screws

Rosettes w/ Wood Screws

Use for mounting plaques to wood or plaster surfaces.

Additional mounting methods

Invisible Frame

Invisible Frame

Ideal if plaque may be relocated in the future. Up to 24″ x 36″. Minimum Depth 1-1/4″ • Minimum Size 12″ x 10″

Brass Rod Stake Mount

Brass Rod Stake Mount

Mounting pad is cast on the back of the plaque to accommodate a 3/8″ threaded 24″-long brass rod. Maximum size 12″ x 8″ • 45° angle also available

Garden Stake Mount

Garden Stake Mount

24″-long stake attaches to back of plaque with machine screws. Stake is painted black or to match painted background color. Maximum size 12″ x 8″ • Straight vertical stake also available. Top to bottom height must be at least 4″

Square Post Back Mount

Square Post Back Mount

Black enamel-coated steel square posts attach to the back of the plaque with machine screws. 3/4″ x 48″ (plaques up to 100 sq. in.); 1″ x 60″ (plaques 101-250 sq. in.); 1 1/2″ x 80″ (plaques 251-450 sq. in.); 2″ x 80″ (plaques over 450 sq. in.). 30° angle also available

Fabricated Aluminum Post Cap Mount

Fabricated Aluminum Post Cap Mount

Perfect for mounting plaques for site identification, wayfinding and directional signage applications. 2 3/8″ round on a 45° angle; 2 3/8″ round on a straight 90° angle; 3″ round on a 45° angle. Post not included

Curved Plaques

Curved Plaques

Cast bronze recommended. For installation on a curved wall or column, plaques can be rolled to match the curve of the surface. Cannot be a stud mount. Limited border availability

Integral Post Cap Mount

Ideal for double-faced plaques with graphics on both sides. Post caps are painted to match plaque background. Post recommended, but not included.

Integral Post Cap Mount - Standard Design
Standard Design
Integral Post Cap Mount - Large Colonial Design
Large Colonial Design
Integral Post Cap Mount - Small Colonial Design
Small Colonial Design
Integral Post Cap Mount - Inverted Radius Design
Inverted Radius Design

Request a quote Plaques